Updated: June 14, 2018
If your air conditioner was installed before 2010 and you don’t know what R22 is then you should probably read up. R22 refrigerant is a chemical that keeps the air coming from your air conditioning system cool, so it’s unquestionably incredibly vital. Most air conditioning units older than 10 years utilize an AC refrigerant called R22 that’s commonly known as Freon*, and is noted by the EPA as HCFC-22. In this article, we’ll use the name R22. This refrigerant was introduced in the 1950s and became the predominant AC refrigerant in the residential heating and cooling industry.
The Montreal Protocol
Fast forward a few decades and the world realized that R22 refrigerant was aiding in the depletion of the Earth’s ozone layer. Not a great thing. So, the U.S. EPA, in cooperation with other agencies and groups around the world, started a phase out of lots of ozone-depleting agents as part of an international agreement known as the Montreal Protocol. The regulation lists many HCFCs and CFCs (different types of refrigerants that deplete the ozone layer), but R22 is considered one of the worst offenders.
Timeline and R22 phase out progress in 2018
In 2003, the phase out of R22 production and imports launched. By early 2010 the production and import of R22 decreased. However, servicing current, existing equipment is still acceptable as long as there is an available supply of R22. To confirm the public’s compliance with the new law, all sales of R22 must be bought by a certified technician. Production and import of R22 will be continually reduced by law until 2020, when all production and import will be eliminated. Only recycled R22 refrigerant will be accessible to service existing air conditioners after 2020.
The graph above shows the EPA’s consumption allowance of R22 by percentage. The limits on R22 consumption were implemented in 2010 and follow a declining trend until 2020.
So how does this affect prices?
If you’re thinking that this sounds like a great case study for an economics professor teaching supply and demand, then you are correct. As you can imagine, older air conditioners could more frequently experience leaks and need repairs. Any air conditioners that are older than 2010 are more likely to use R22, which means there’s a lot more demand for it, and a restricted supply. Prices have only gone up due to scarcity.
Recall that in order to purchase R22, you have to be an EPA-certified technician. So, the average homeowner can’t purchase a cylinder themselves. Also, there are some firm regulations now on how refrigerant should be reclaimed and recycled, which adds to the cost. This cost is passed on to the homeowner as companies must cover the increased overhead connected to R22 repairs. There are requirements for importing, labeling, record keeping, reporting, destruction and reclaiming of R22 from existing air conditioners.
So, what does this mean for you?
The cost of R22 is considerably increasing because of the dwindling supply, and new refrigerant will no longer be available for use at all after 2020, except from recycled quantities.
If you’re thinking, “Wow, this is starting to sound expensive,” you’re right, it is. This is why when our professionals come out to inspect your unit we look to see what refrigerant your unit uses, and in many cases, we’ll recommend an upgrade because of the increasing cost of maintaining an R22 air conditioner.
How do I know if my unit uses R22?
If you have an air conditioning system that was built before 2010, your AC will probably have R22. However, if you installed your air conditioner after January 1, 2010, then your system may not have R22. You can check the type of refrigerant your system runs on by reading the appliance’s nameplate. This nameplate is normally found on the outdoor condenser of your central air conditioning system. If you can't find it, you can check your user’s manual. Otherwise, you can call your local Service Experts center. If you have a maintenance agreement with us, we also have your information on hand and a tech can let you know quickly if your unit uses R22.
Instead of Freon, use Puron
The industry has moved from R22 to R410a, which you may identify by the brand name Puron. In the remainder this article, we’ll use the name R410a (although Puron is a familiar brand, there are other companies that make R410a). There are some serious benefits to switching from an R22 air conditioning unit to one that uses R410a. It has a higher safety rating and an ozone depletion rating of zero, and it performed slightly better on energy-efficiency tests than R22.
You may have read about “drop-in” replacements for R22. We strongly against against this route. Normally a homeowner who is anxious about the cost of replacing their air conditioner seeks out an alternative, and this appears to be an easy solution. It often costs the homeowner more money, and almost always voids the manufacturer warranty. The truth about “drop-ins” is that there is no “drop-in” solution where you simply swap out the refrigerant. The phrase “drop-in” is indicating retrofitting a air conditioner, which when done properly can cost the homeowner as much, or more, money than buying a new unit that uses R410a. In part, this is because different refrigerants function at different pressure levels and demand different parts to run, which means the technician is forced to replace the most expensive components of your system to work with the new refrigerant. If this vital step is missed, your system will quickly stop operating, and you’ll need to get a new unit anyway.
Your manufacturer will probably not pay for the parts to make this swap because retrofitting your AC system will likely void the warranty. It’s usually just a temporary fix, but buying a new upgraded AC system will probably benefit most homeowners in dependability, satisfaction, and long-term comfort.
It’s better to discuss pricing offers with your HVAC provider if you’re concerned about cost. At Service Experts Heating & Air Conditioning, we offer financing that makes a replacement affordable, and we keep track of any manufacturer and utility rebates that would make it easier to handle a surprising replacement. To reduce the chances of an emergency on a hot day, many of our customers elect to do a pre-emptive replacement, and replace an old unit before it quits working. If you’re of a similar mind, then you’re in good company!
If your unit was built after 2010, you’re probably safe
If your heating and air conditioning system was built after January 2010, the R22 phase out problem may not apply to you, because it’s likely that your system uses the new, approved replacement refrigerant, R410a. However, systems installed after 2010 could still use R22, so it’s ideal to check with an HVAC Expert. You can always look for and the refrigerant type by reviewing the nameplate on your condenser (the condenser is the outside unit).
What do I do if my air conditioner uses R22?
To review, if your HVAC equipment was produced prior to January 2010, specifically if it’s older than a decade, you have some options:
- Purchase an upgraded, more environmentally-friendly system that uses R410a.
- Contact an expert to replace the parts in your current air conditioner to help make it compatible with an approved air conditioner refrigerant. This is not recommended.
- Stick with using recycled R22 and burn cash like it’s the ozone layer.
To be clear, the EPA regulates the production and use of this refrigerant, but not your unit. The law doesn’t require you to replace your air conditioner. At some point, your AC will not work and it will need to be replaced, and only R410a units will be available for sale.
The ideal option is to get a new, upgraded air conditioner, specifically if your current air conditioner is already more than 10 years old. Service Experts Heating & Air Conditioning has many financing options that help make the purchase affordable, and again, we look out for rebates from HVAC manufacturers and local utilities to make it easier on you. New AC equipment can be more efficient and offer you superior comfort, helping to reduce your energy costs.
We do have one more option available in select locations. To provide our customers with high-quality equipment and service at competitive rates, we started the Advantage Program, which is a worry-free program that provides HVAC equipment with a full coverage repair and maintenance plan for a low monthly price.
You could also choose the status quo and continue using recycled R22 air conditioning refrigerant for the foreseeable future. While this sounds like a good alternative, the cost of servicing old R22 A/C systems is starting to surpass several hundred dollars (easily a down payment on a new system). You may also see the prices increase as demand continues to rise on a substance that is no longer produced or widely available.
If you aren’t sure what type of AC refrigerant your air conditioning system uses, let us help. Call Service Experts Heating & Air Conditioning today and we can provide an inspection to determine if you are currently using R22 and, if so, what’s the best next step.
The good news
While making the transition to an approved AC refrigerant may intimidating, it’s helping to save the ozone layer. These regulations will help protect the ozone layer in the Earth’s atmosphere, which helps block radiation from the sun and prevents serious illnesses, such as skin cancer. It’s not far-fetched to say that you, as a homeowner, are a large part of this by replacing an old R22 unit with a newer, ozone friendly unit.
If you have any questions, please reach us for a free, in-home consultation by filling out the form below.
*Freon is a registered trademark of the DuPont Corporation